Tags |
|
|
Links |
|
|
Other Added - Cisco CCNA / CCNP Exam Tutorial: EIGRP Dual Queries, SIA, And Stub Routers
1. A network marketing leader doesn’t wait until he/she gets a large group before becoming a leader. It can’t work that way, because you would never get the large group if you’re waiting to be leader first! Nor does the leader wait until they feel they possess the knowledge to lead - rarely they do. My observation is that leaders select themselves by taking on r
receive-only Set IP-EIGRP as receive only neighbor
static Do advertise static routes
summary Do advertise summary routes
Assume a network where R5 is the hub and R4, R6, and R7 are spokes. As long as the spokes have a neighbor relationship only with the hub, they can be configured as stub routers. They will then advertise their directly connected networks and summary routes back to the hub and will receive only a default route back from the hub. If R5 loses a successor and has no feasible successor, it will not send
Ben Stein has a book called How to Ruin Your Finances. To be honest, I’m not sure an entire book is needed on the subject—there are some fairly quick and easy ways to accomplish the task. (Before continuing, let me be clear that I do not actually recommend such activities—This is a reductio absurdum argument, meant to spur an opposing realization.)#1: Buy ev
A problem with EIGRP comes in when a successor is lost and there is no feasible successor. DUAL doesn't give up that easily, though. DUAL will mark the route as Active, indicating that the route is being calculated and cannot be used to route data, and will send out a Query message.
A DUAL Query is basically one neighbor asking another, "Hey, do you know how to get to this network I just lost my route to?" If that neighbor has a route, the query will be answered with that route; if the neighbor doesn't have such a route, that neighbor will ask its neighbors. The process continues until a downstream router replies with the desired route, or the EIGRP downstream routers run out of neighbors to ask.
It's a good idea to limit the scope of your DUAL queries, otherwise routes may go into Stuck In Active state during this reconfiguration. Route summarization helps to limit queries, as does configuration of EIGRP stub routers.
While EIGRP does not have the stub area options that OSPF does, EIGRP does allow a router to be configured as stub. This is commonly done with a hub-and-spoke configuration where the spoke routers do not have the resources to keep a full routing table. Since the spoke's next hop will always be the hub, all the spoke really needs is a default route. For this reason, the only neighbor an EIGRP stub router can have is the hub router. (Obviously, the hub would never be configured as stub.)
Configuring EIGRP stub routers also combats the SIA problem. EIGRP stub routers are not queried for routes when the hub does not have a feasible successor for a successor route that has gone down.
By default, EIGRP stub routers advertise information about two types of routes back to the hub - directly connected networks and summary routes. To change this default, use the eigrp stub command followed by the types of routes you want the stub to advertise back to the hub. (The eigrp stub command run by itself configures the router as stub.)
R1(config)#router eigrp 100
R1(config-router)#eigrp stub ?
connected Do advertise connected routes
receive-only Set IP-EIGRP as receive only neighbor
static Do advertise static routes
summary Do advertise summary routes
Assume a network where R5 is the hub and R4, R6, and R7 are spokes. As long as the spokes have a neighbor relationship only with the hub, they can be configured as stub routers. They will then advertise their directly connected networks and summary routes back to the hub and will receive only a default route back from the hub. If R5 loses a successor and has no feasible successor, it will not send a
Customer Service is not as simple as students may surmise. But that does not mean that any business cannot at least improve upon their customer service. I suppose there is a book called; Customer Service for Dummies. And if you want to improve your customer service skills and you think you are a dumb dumb then let me offer a few tips on things you can do to make yo
It's a good idea to limit the scope of your DUAL queries, otherwise routes may go into Stuck In Active state during this reconfiguration. Route summarization helps to limit queries, as does configuration of EIGRP stub routers.
While EIGRP does not have the stub area options that OSPF does, EIGRP does allow a router to be configured as stub. This is commonly done with a hub-and-spoke configuration where the spoke routers do not have the resources to keep a full routing table. Since the spoke's next hop will always be the hub, all the spoke really needs is a default route. For this reason, the only neighbor an EIGRP stub router can have is the hub router. (Obviously, the hub would never be configured as stub.)
Configuring EIGRP stub routers also combats the SIA problem. EIGRP stub routers are not queried for routes when the hub does not have a feasible successor for a successor route that has gone down.
By default, EIGRP stub routers advertise information about two types of routes back to the hub - directly connected networks and summary routes. To change this default, use the eigrp stub command followed by the types of routes you want the stub to advertise back to the hub. (The eigrp stub command run by itself configures the router as stub.)
R1(config)#router eigrp 100
R1(config-router)#eigrp stub ?
connected Do advertise connected routes
receive-only Set IP-EIGRP as receive only neighbor
static Do advertise static routes
summary Do advertise summary routes
Assume a network where R5 is the hub and R4, R6, and R7 are spokes. As long as the spokes have a neighbor relationship only with the hub, they can be configured as stub routers. They will then advertise their directly connected networks and summary routes back to the hub and will receive only a default route back from the hub. If R5 loses a successor and has no feasible successor, it will not send
Vintage books and magazines were packed with prints and advertisements and other paper items which are not only interesting, but very collectable, and profitable, too. So many things derived from these old publications are hot sellers on eBay including: prints, advertisements, knitting and other craftwork patterns, recipes, how to articles, historical articles, mu
Configuring EIGRP stub routers also combats the SIA problem. EIGRP stub routers are not queried for routes when the hub does not have a feasible successor for a successor route that has gone down.
By default, EIGRP stub routers advertise information about two types of routes back to the hub - directly connected networks and summary routes. To change this default, use the eigrp stub command followed by the types of routes you want the stub to advertise back to the hub. (The eigrp stub command run by itself configures the router as stub.)
R1(config)#router eigrp 100
R1(config-router)#eigrp stub ?
connected Do advertise connected routes
receive-only Set IP-EIGRP as receive only neighbor
static Do advertise static routes
summary Do advertise summary routes
Assume a network where R5 is the hub and R4, R6, and R7 are spokes. As long as the spokes have a neighbor relationship only with the hub, they can be configured as stub routers. They will then advertise their directly connected networks and summary routes back to the hub and will receive only a default route back from the hub. If R5 loses a successor and has no feasible successor, it will not send
Over the past few years, I have been saving money each month, not for any particular reason like for example to buy a house, but just in case something big went wrong. It is in a way a form of self-insurance. In this article I write about the benefits of doing this and about my own personal experiences, i.e how hard or easy it has been saving in this way.May
By default, EIGRP stub routers advertise information about two types of routes back to the hub - directly connected networks and summary routes. To change this default, use the eigrp stub command followed by the types of routes you want the stub to advertise back to the hub. (The eigrp stub command run by itself configures the router as stub.)
R1(config)#router eigrp 100
R1(config-router)#eigrp stub ?
connected Do advertise connected routes
receive-only Set IP-EIGRP as receive only neighbor
static Do advertise static routes
summary Do advertise summary routes
Assume a network where R5 is the hub and R4, R6, and R7 are spokes. As long as the spokes have a neighbor relationship only with the hub, they can be configured as stub routers. They will then advertise their directly connected networks and summary routes back to the hub and will receive only a default route back from the hub. If R5 loses a successor and has no feasible successor, it will not send
Increasing Customer Retention with an Adequate Return PolicyProduct returns and exchanges are a necessary evil in doing business. The method in which a merchant handles returns plays a key role in the company’s customer loyalty. Good return policies equal good return customers. As with most systems in business, consumers model the 80/20 r
receive-only Set IP-EIGRP as receive only neighbor
static Do advertise static routes
summary Do advertise summary routes
Assume a network where R5 is the hub and R4, R6, and R7 are spokes. As long as the spokes have a neighbor relationship only with the hub, they can be configured as stub routers. They will then advertise their directly connected networks and summary routes back to the hub and will receive only a default route back from the hub. If R5 loses a successor and has no feasible successor, it will not send a query packet to any of the stub routers.
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.otheradded.com/article/171102/otheradded-Cisco-CCNA--CCNP-Exam-Tutorial--EIGRP-Dual-Queries-SIA-And-Stub-Routers.html">Cisco CCNA / CCNP Exam Tutorial: EIGRP Dual Queries, SIA, And Stub Routers</a>
BB link (for phorums):
[url=http://www.otheradded.com/article/171102/otheradded-Cisco-CCNA--CCNP-Exam-Tutorial--EIGRP-Dual-Queries-SIA-And-Stub-Routers.html]Cisco CCNA / CCNP Exam Tutorial: EIGRP Dual Queries, SIA, And Stub Routers[/url]
Related Articles:
Improve Your Lifestyle - Release The Money In Your Home
Buying Pre-Foreclosure Homes Can Be Your Very Lucrative Real Estate Investing Niche
Bookmark it:
|