Tags |
|
|
Links |
|
|
Other Added - Cisco Certification: An Introduction To Multilayer Switching And SVIs
An inheritance is the precious fruit of years of labor. It is an expression of love. Nowadays, more than ever, an inheritance is something that should be protected. All too often, inheritances are squandered or lost because of a lack of planning by those giving it. Read on to discover how to easily change that.There are many dangers that can threaten the inheritance you leave your children or heirs. The
SW1(config)#int vlan11
01:30:04: %LINK-3-UPDOWN: Interface Vlan
If you are in the professional car care business you may be looking to expand your business, for that no one can blame you. But which add on service makes the most sense? You will have to make an honest assessment of your current clientele and decide that for your self. If you own a fixed site detail shop, a car wash or a mobile automotive appearance business there are many options to look at. Maybe you do not
Why? We can use an SVI to allow inter-VLAN communication on a multilayer switch, eliminating the need for a separate router to get involved.
In this example, we have Host_1 in VLAN 11 and Host_3 in VLAN 33. Before we begin configuring, we'll send pings between the two hosts. (We’ll use Cisco routers for the hosts in this lab, which is why the ping output may look familiar!)
HOST_1#ping 30.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 30.1.1.1, timeout is 2 seconds:.....
Success rate is 0 percent (0/5)
HOST_3#ping 20.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 20.1.1.1, timeout is 2 seconds:.....
Success rate is 0 percent (0/5)
As we expect, there’s no IP connectivity between the hosts. Assuming the appropriate switch ports are already placed in VLAN 11 and VLAN 33, we’ll now create two switched virtual interfaces on this multilayer switch. One will represent VLAN 33, and the other will represent VLAN 11.
SW1(config)#int vlan11
01:30:04: %LINK-3-UPDOWN: Interface Vlan1
Everyone that owns a small business needs proficiency in writing business letters, whether the owner of the company writes the letters or an employee writes the letters.It does not require a course at a business school to learn to write effective business letters. It does however require a basic knowledge of correct grammar and punctuation.When sending a letter promoting your business, you want t
In this example, we have Host_1 in VLAN 11 and Host_3 in VLAN 33. Before we begin configuring, we'll send pings between the two hosts. (We’ll use Cisco routers for the hosts in this lab, which is why the ping output may look familiar!)
HOST_1#ping 30.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 30.1.1.1, timeout is 2 seconds:.....
Success rate is 0 percent (0/5)
HOST_3#ping 20.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 20.1.1.1, timeout is 2 seconds:.....
Success rate is 0 percent (0/5)
As we expect, there’s no IP connectivity between the hosts. Assuming the appropriate switch ports are already placed in VLAN 11 and VLAN 33, we’ll now create two switched virtual interfaces on this multilayer switch. One will represent VLAN 33, and the other will represent VLAN 11.
SW1(config)#int vlan11
01:30:04: %LINK-3-UPDOWN: Interface Vlan
Myth #1: Internet retailers can only compete on priceThere are many competitive advantages that internet retailers enjoy other than just lower operating costs. For instance, customers in other states are not subject to sales tax - this in many times more than offsets shipping costs.Probably the most obvious advantage that an internet retailer has is audience. If you open a retail
HOST_1#ping 30.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 30.1.1.1, timeout is 2 seconds:.....
Success rate is 0 percent (0/5)
HOST_3#ping 20.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 20.1.1.1, timeout is 2 seconds:.....
Success rate is 0 percent (0/5)
As we expect, there’s no IP connectivity between the hosts. Assuming the appropriate switch ports are already placed in VLAN 11 and VLAN 33, we’ll now create two switched virtual interfaces on this multilayer switch. One will represent VLAN 33, and the other will represent VLAN 11.
SW1(config)#int vlan11
01:30:04: %LINK-3-UPDOWN: Interface Vlan
One ingredient common to top salespeople is the ability to consistently deliver effective presentations. An effective presentation moves a customer from their current position to a position of action.Effective presenters use the following Methodology Selling™ techniques to move customers to action.1. Preparation – Establish a very clear vision or goal. Ensure your thoughts and ideas are clear as
Sending 5, 100-byte ICMP Echos to 20.1.1.1, timeout is 2 seconds:.....
Success rate is 0 percent (0/5)
As we expect, there’s no IP connectivity between the hosts. Assuming the appropriate switch ports are already placed in VLAN 11 and VLAN 33, we’ll now create two switched virtual interfaces on this multilayer switch. One will represent VLAN 33, and the other will represent VLAN 11.
SW1(config)#int vlan11
01:30:04: %LINK-3-UPDOWN: Interface Vlan
Authors, self publishers and book publishers can be very unhappy when they see boxes of books delivered from the printer, loaded onto pallets in their garage and not have any idea on how they're going to sell them; don't let this happen to you -- be prepared. Self publishers need to have a good marketing plan to sell books and should be written prior to writing your book and in place a year prior to publishing
SW1(config)#int vlan11
01:30:04: %LINK-3-UPDOWN: Interface Vlan11, changed state to up
01:30:05: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan11, changed state to up
SW1(config-if)#ip address 20.1.1.11 255.255.255.0
SW1(config-if)#int vlan33
01:30:11: %LINK-3-UPDOWN: Interface Vlan33, changed state to up
01:30:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan33, changed state to up
SW1(config-if)#ip address 30.1.1.11 255.255.255.0
At this point, we’ve still got a problem when we look at the routing table.
SW1# show ip route
Default gateway is not set
Host Gateway Last Use Total Uses Interface
ICMP redirect cache is empty
The problem is that we don’t have a routing table, because IP routing is off by default on a multilayer switch. Let’s turn IP routing on and then check the routing table.
SW1(config)#ip routing
SW1(config)#^Z
SW1#show ip route
Gateway of last resort is not set
20.0.0.0/24 is subnetted, 1 subnets
C 20.1.1.0 is directly connected, Vlan11
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.otheradded.com/article/170921/otheradded-Cisco-Certification--An-Introduction-To-Multilayer-Switching-And-SVIs.html">Cisco Certification: An Introduction To Multilayer Switching And SVIs</a>
BB link (for phorums):
[url=http://www.otheradded.com/article/170921/otheradded-Cisco-Certification--An-Introduction-To-Multilayer-Switching-And-SVIs.html]Cisco Certification: An Introduction To Multilayer Switching And SVIs[/url]
Related Articles:
4 Debt Relief Tips To Help You Get Out From Under Your Mountain of Debt
How to Get The Best Mortgage if You Have Really Bad Credit or a Credit Score Below 600
7 Things To Consider Before Joining A Network Marketing Program
Bookmark it:
|